We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Kingston Technology IronKey 32GB USB-C Keypad 200C, FIPS 140-3 Lvl 3 (Pending) AES-256
SKU
IKKP200C/32GB
£127.46
£106.22
In stock
32GB USB-C IronKey Keypad 200C, FIPS 140-3 Lvl 3 (Pending) AES-256
The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.
The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.
The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.
With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.
The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.
KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.
FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.
OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.
Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.
Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.
The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.
The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.
With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.
The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.
KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.
FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.
OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.
Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.
Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.
SKU | IKKP200C/32GB |
---|---|
EAN | 0740617336634 |
Manufacturer | Kingston Technology |
PDF Url | https://inishop.com/objects/mmo_114062547_17 |
AVAILABILITY | Y |
Memory | |
---|---|
Capacity | 32 GB |
Write speed | 115 MB/s |
Read speed | 145 MB/s |
Form factor | Sleeve |
Performance | |
Device interface | USB Type-C |
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Capacity | 32 GB |
Write speed | 115 MB/s |
Read speed | 145 MB/s |
Plug and Play | Yes |
Compatible operating systems | Microsoft Windows, macOS, Linux, ChromeOS, Android |
PIN-secured access | Yes |
Keypad number of keys | 11 |
Keypad integrated | Yes |
Password protection | Yes |
Security algorithms | 256-bit AES-XTS, FIPS 140-3 |
Hardware encryption | Yes |
Design | |
International Protection (IP) code | IP68 |
Key ring | Yes |
Product colour | Blue |
LED indicators | Pin |
Protection features | Dust resistant, Waterproof |
Form factor | Sleeve |
Security | |
PIN-secured access | Yes |
Keypad number of keys | 11 |
Keypad integrated | Yes |
Password protection | Yes |
Security algorithms | 256-bit AES-XTS, FIPS 140-3 |
Hardware encryption | Yes |
Read-only function | Yes |
User and admin roles | Yes |
Operational conditions | |
Operating temperature (T-T) | 0 - 50 °C |
Storage temperature (T-T) | -20 - 60 °C |
Technical details | |
---|---|
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Key ring | Yes |
Product colour | Blue |
LED indicators | Pin |
Protection features | Dust resistant, Waterproof |
Plug and Play | Yes |
Country of origin | China, Taiwan |
Compatible operating systems | Microsoft Windows, macOS, Linux, ChromeOS, Android |
Weight & dimensions | |
Package depth | 12.4 mm |
Width | 20.1 mm |
Weight | 25 g |
Package width | 129.5 mm |
Package height | 184.2 mm |
Package weight | 48.1 g |
Height | 10.6 mm |
Depth | 80 mm |
Packaging data | |
Package depth | 12.4 mm |
Package width | 129.5 mm |
Package type | Blister |
Package height | 184.2 mm |
Package weight | 48.1 g |
Packaging content | |
Quantity per pack | 1 pc(s) |
Logistics data | |
Products per master (outer) case | 8 pc(s) |
Master (outer) case width | 135.9 mm |
Master (outer) case length | 203.2 mm |
Master (outer) case height | 69.9 mm |
Master (outer) case gross weight | 462.77 g |
Other features | |
Country of origin | China, Taiwan |
Compatible operating systems | Microsoft Windows, macOS, Linux, ChromeOS, Android |